#page { padding-top: 10px; } #page { margin-top: 140px !important; }
Eurorack, Patchbay
CB Electronics
First two Finished EuroRack modules

Finally - We are happy with the silk screen, we are sending out the first modules to be tested by users next week. We can now get the Gain module silk screened! Happy Days.

First two Finished EuroRack modules
Analogue Summing, Patchbay
CB Electronics
New Product Range Designed for EuroRack Synths

New Product Range Designed for EuroRack Synths.

In November 2023 we were aked if we could make a version of the XPatch for EuroRack Synthesisers, This has been an interesting and enjoyable project and we are now at the prototype stage.

New Product Range Designed for EuroRack Synths
Timecode
CB Electronics
Release of the TC-7 Midi & TC-5net Midi

We are proud to announce the release of the TC-5net Midi and the TC-7 Midi.

The TC-5net adds an Ethernet port with Artnet timecode support to the TC-5B-Midi. It is available with the ethernet port fitted or without the ethernet port fitted, with the ability to upgrade to have an ethernet port at a later date.

The TC-7 Midi adds dual LTC inputs, timecode distribution and Status display to the TC-5net Midi, in a 1U unit.

Release of the TC-7 Midi & TC-5net Midi
Patchbay
CB Electronics
Sound on Sound in Depth XP-Relay Review

Another great in depth review from Matt Houghton at Sound on Sound for our XP-Relay!

It’s a winning combination of sophisticated software and refreshingly simple hardware.

Read the review with the link below to see what he thinks.

Sound on Sound in Depth XP-Relay Review
CB Electronics
Connecting The Pyra-Sum Passive Summing Mixer ...

Recently a customer asked for advice on how to connect the Prya-Sum to an XPatch. I looked at the specification of the Pyra-Sum it seemed to be a natural fit with the XPatch and that they would work well together. I decided to generate an example using the XPatch-64, Pyra-Sum, equalizers and Compressors. The XPatch-96 should be used for larger systems.

Connecting The Pyra-Sum Passive Summing Mixer to XPatch

XPatch-64

"F'ing Brilliant!" reports XPatch-64 User

"F'ing Brilliant!" reports XPatch-64 User

Loving this XPatch-64! One click and I’m tracking synths. Another and I’m tracking guitars or vox through my favorite hardware effects chains. Another click and I’m mixing or mastering w/ the same hardware on FX channels. F’ing brilliant. #xpatch64

David is using the Path Store to switch between five different setups

Thank You David!

New Product: XP-Relay available later this year

New Product: XP-Relay available later this year

XPatch is designed to replace a physical patch bay, however the electronic versions cannot pass Phantom and can have noise issues. It is possible to implement smaller electronic path systems using relays as the switching element. The new XP-Relay range is designed to satisfy this market and will be available in 4 sizes.

XPatch : New 8 channel Microphone Boost Card

XPatch : New 8 channel Microphone Boost Card

All Electronic Patch bays have two problems with microphone or other low level sources are noise and crosstalk between low level and high level inputs.. For this reason CB have always and still maintain that for optimum performance the Mic Amp should be placed before the Patch bay.

Where this is not possible, the Microphone Boost Card provides a good compromise solution. Providing Eight Channels of 30dB of low noise gain at the input to XPatch enables dynamic and ribbon Microphones to be connected directly and by adding a external phantom supply phantom powered microphones. To use with line level sources simply add an in-Line attenuator.

Announcing XPatch-64 with XPatch2 Software

Announcing XPatch-64 with XPatch2 Software

CB Electronics introduces XPatch-64 with XPatch2 software. XPatch-64 is a 64x64 digitally controlled, fully analogue audio patch bay routing system for audio professionals and aimed at streamlining workflow in even the most demanding post or music studios. Design based on the XPatch-32.

After user feedback from the XPatch-32, we have now added to XPatch-32/64 a High Impedance I/P card option for guitar pedals, Instruments etc and a 5 pin DIN Midi I/P to allow snapshot selection from midi pedals.

New XPatch2-win/mac software for XPatch-32 or XPatch-64

New XPatch2-win/mac software for XPatch-32 or XPatch-64

In the next two weeks the first XPatch-64’s should reach their new owners! We are releasing a new software ‘XPatch2’ to control both XPatch-32 and XPatch-64, The new version has a few improvements on the original XPatch-32-win/mac software.

The first video shows how to set up the program for the XPatch-32 or XPatch-64 and a quick look at the various screens