IMPORTANT BUG FIX
A bug in the conversion from USB Midi to LTC time code fixed!
A bug in the conversion from USB Midi to LTC time code fixed!
TC-5B Software updated to Build 37 - MMC Labels added to commands and tallies
TC5B-RS422 User guide.pdf updated
TC5B-RS422 Config.pdf added
TC5B-RS422 Firmware updated - MMC and P2 Track arming and motion control commands
Config 1-4 Defaults updated as follows
Config 1 Default = RS422 Controller, TC Source = RS422, Ref =Video, USB Arm -> RS422 24trk
Config 2 Default = RS422 Device, TC Source = USB Midi, Ref = Source, RS422 Arm -> USB midi
Config 3 Default = RS422 Device, TC Source = Virtual Machine, Ref = Video, RS422 Arm -> USB
Config 4 Default = RS422 Device, TC Source = USB Midi, Ref = Word Clock, RS422 Arm -> USB
Note. each config must be set to factory default individually!
TC-5B-RS422 firmware finalized, the TC-5B-Midi updated to match.
Software
Setup pages added for command destination, Loop and Jam
GPIO Page updated
Firmware
New Command Routing added USB MMC and Serial command destination Menu
Serial Commands added to GPO EDL
Date now available in LTC User Data
Both Firmware and Windows/Mac software must be updated
1) A firmware bug that caused erratic problems found, we recommend that all users update to this firmware version (22A10)! We have removed older versions of the firmware, Please contact us if you have any problems.
——————————————————-
2) Wordclock frequency moved from advanced menu to normal menu
1) Recovery document added
2) Documentation updated with menu changes
Firmware Updates
1) Midi Full Time and or Midi Locate added to second Midi Channel
2) Jam Control Simplified
Software Updates
1) Control Panel Merged with Main Window
2) TC Source and Selected Display added
3) Loop Control Panel Added
4) Jam Control Panel added
Manual Updates
To reflect new Software and Firmware
New Functions
Second USB Midi Port (MIDIIN2 (TC-5-Midi) now Receives MTC
This allows you to connect your application to the TC-5B and then control the TC-5B from the TC-5B App
MIF4 Compatibility
MMC commands to select the Time code source added
Bug Fixes
Occasional Display Lockout on Start:- Fixed