#page { padding-top: 10px; } #page { margin-top: 140px !important; }

NAMM 2023

Next Month (April 13th to 15th) CB Electronics will be exhibiting with Wes Dooley at the NAMM show in Anaheim.

Visit Stand 15624 to chat with Colin about CB Electronics products and/or Wes about Ribbon Microphones.

We Look forward to seeing you there.

Featured
First two Finished EuroRack modules
First two Finished EuroRack modules

Finally - We are happy with the silk screen, we are sending out the first modules to be tested by users next week. We can now get the Gain module silk screened! Happy Days.

Read More →
New Product Range Designed for EuroRack Synths
New Product Range Designed for EuroRack Synths

New Product Range Designed for EuroRack Synths.

In November 2023 we were aked if we could make a version of the XPatch for EuroRack Synthesisers, This has been an interesting and enjoyable project and we are now at the prototype stage.

Read More →
Release of the TC-7 Midi & TC-5net Midi
Release of the TC-7 Midi & TC-5net Midi

We are proud to announce the release of the TC-5net Midi and the TC-7 Midi.

The TC-5net adds an Ethernet port with Artnet timecode support to the TC-5B-Midi. It is available with the ethernet port fitted or without the ethernet port fitted, with the ability to upgrade to have an ethernet port at a later date.

The TC-7 Midi adds dual LTC inputs, timecode distribution and Status display to the TC-5net Midi, in a 1U unit.

Read More →
Sound on Sound in Depth XP-Relay Review
Sound on Sound in Depth XP-Relay Review

Another great in depth review from Matt Houghton at Sound on Sound for our XP-Relay!

It’s a winning combination of sophisticated software and refreshingly simple hardware.

Read the review with the link below to see what he thinks.

Read More →
Connecting The Pyra-Sum Passive Summing Mixer to XPatch
Connecting The Pyra-Sum Passive Summing Mixer to XPatch

Recently a customer asked for advice on how to connect the Prya-Sum to an XPatch. I looked at the specification of the Pyra-Sum it seemed to be a natural fit with the XPatch and that they would work well together. I decided to generate an example using the XPatch-64, Pyra-Sum, equalizers and Compressors. The XPatch-96 should be used for larger systems.

Read More →
Saving XPatch setup with the DAW Session
Saving XPatch setup with the DAW Session

Users have asked if we have a plug-in that would allow them to save the xpatch setup with their session. While looking at this for the future we have an interim solution.

Read More →
NAMM 2023 Who's Coming to See Us?
NAMM 2023 Who's Coming to See Us?

It’s the first day of the show.

Meet Hardware and Software Designer Colin Broad at NAMM 2023, Stand 15624.

Who's coming round for a chat/demo of our new products?

Read More →
NAMM 2023
NAMM 2023

Next Month (April 13th to 15th) CB Electronics will be exhibiting with Wes Dooley at the NAMM show in Anaheim.

Read More →
XPatch 4.2 Release
XPatch 4.2 Release

Apart from the some small bug fixes in both the Software and firmware the main change with XPatch 4.2 is the inclusion of a Stream Deck Interface.

Read More →
TC5 Shipping
TC5 Shipping

We received the long waited metalwork at midday today (31 Jan 23) and have started assembling the finished units, we are on track to ship about 25 this week complete with rack ears and the remainder next week which will leave us with about 50 in stock

Read More →
TC5B-Midi delivery delay
TC5B-Midi delivery delay

We spoke to our metalworker supplier today (Wednesday 25th Jan 2023) and the have told us that delivery will now be on Monday the 30th due to a hold up with painting..

Read More →
New USB-422 Low Latency Driver for OS X10.15 and macOS 11/12
New USB-422 Low Latency Driver for OS X10.15 and macOS 11/12

The standard latency on the Apple/FTDI driver is 16milli-Seconds this is too slow for reliable serial control. On Windows the FTDI driver allows you to set the latency, on Mac the latency is fixed. We provide a low latency FTDI Driver for MAC OSX Mac OS X10.15 and macOS 11/12. This is based on the FTDI  Beta driver release and the installer should be run from the Applications folder on your machine.

Read More →
TC-5B-Midi Pre-Order
TC-5B-Midi Pre-Order

The CB Online shop is now accepting pre-orders for the TC-5B-midi, We are waiting for the metalwork which should arrive about the 15th of January and expect initial deliveries will be before the end of January 2023.

Read More →
CB Product Prices Increasing
CB Product Prices Increasing

Unfortunately due to component price rises we have been forced to put the price up on the XPatch-32/64/96.

Read More →