Using a Channel Strip with XPatch-32/64/96
I was recently asked how to use a channel strip with input, output and insert in/out with the XPatch-32/64/96,
My suggestion is as follows
1) Add the Main in/out connections with device enabled
2) Add the Insert In/Out connections with Normal Enabled
The first XPatch-96 undergoing thermal soak test
The first XPatch-96 was completed this week and is undergoing thermal tests.. Housed in the same 2U rack box as the XPatch-64 it was a tight fit! The XPatch-96 runs a little warmer than the XPatch-64 as was expected.
XPatch Noise and Distortion Measurments
The following measurements were made in our workshop using a XPatch-32 and dScope M1 where relevant a screen shot is included.
Can you Control More Than 1 XPatch?
Since the release of the XPatch we have been asked if you can control more than 1 XPatch the answer is Yes. You can control up to 4 XPatch’s.
Does the XPatch-64 have a Fan?
Since the release of the XPatch-64 we have had several people asking if the XPatch-64 has a fan. The answer is it does but we thought we would run some more tests to see how necessary it is as the XPatch-32 has no fan.