#page { padding-top: 10px; } #page { margin-top: 140px !important; }

Using the UR-422 as a remote to the RM-6 or CBServer(2)

The UR-422 is a small flexible keyboard with user definable keys which may be used to control two RS-422 machines or as a remote directly to the RM-6 or via CBServer(2). Some special commands have been aded to increase the functionality of the UR-422 when used in this mode.

When used as a remote to the RM-6 directly or via CBServer a number of settings have be made as follows

UR-422

Setup/Root/Serial port A(B)/Menu  Position Request Type to 6=XMC
Configure Keyboard as required,

RM-6/SR-4

Setup/Root/Ext/Menu 097 Remote Control of 1= Selected Machine
Setup/Root/Ext/Menu 098 External Machine ID 0=Mast

CBServer

The S9 I/P port must be defined on the S9 I/P window (Access from the popup menu or a macro key)



CBServer2

The Device(Input) port must be defined in the Ports page of the Preferences window

RM-6 and CBServer(2) Commands
CBServer(2) only Commands
Label
Function
Lable
A
Select Port A
CBSrvr A
B
Select Port B
CBSrvr B
C
Select Port C
CBSrvr C
D
Select Port D
CBSrvr D
E
Select Port E
CBSrvr E
Master
Make Current Port Master
CBSrvr F
Chase
Chase Enable Current Port
CBSrvr G
Rec Enable
Record Enable Current Port
CBSrvr H


CBServer(2) Macro Commands

CBServer Macro Commands may be assigned to any CBServer macro in the S9 I/P window (CBServer) or Preferences / Ports window (CBServer2).