When I am at a show I demonstrate the software to customers or if there are no customers I test the software and look for any improvements. Whilst at Namm I improved the new grouping software and fixed a bug in the isolated group paths..
Since returning I have added the following
File/AutoSave menu item. When enabled the software will save any changes you make after about 5 seconds
Changed the [Verify] key on the Paths page to an [Enforce] key. this will clear all the connections and then establish only the connections as defined on the Paths page
Added a warning message when the XPatch4 software loses contact with a XPatch or XP-Relay unit.
Right Click on Gain display in the Matrix Display now resets the gain to 0dB
Right Click on Phantom indicator in Matrix Display enable/disable phantom
Midi Automation updated, to control snapshots, path store and matrix. See the Midi Automation window for details
Stream Deck XL now has a Paths page to enable/disable/bypass individual paths
XP-Relay
New Front Panel Menu to allow the 8 switches to select between snapshots
Note. Currently the LEDs still indicate the Phantom Power
Note: You will need to update XP-Relay firmware.